Note: The steps below assume you already have your IP camera installed and connected to a router with Internet access. HTTP://192.168.1.101 represents the IP address of the camera being accessed or there could be another depending on the manufacture of the camera.
Step 1
Find your camera’s IP address. The easiest way to find the security camera IP address is to check the Network page on the CCTV camera software (mobile app or PC client). The network page will display all the IP address information of your camera.
Step 2
Open a web browser and type the IP address. Enter your login information.
Step 3
Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. The default is 80.
Usually there is no need to change the port number. However some ISPs block port 80, so you may need to change the port number accordingly. In the image below, we changed it to 3333.
Step 4
After you change the port, you will need to reboot the camera in order to save the changes. You can do that by going to SETTING > BASIC > System > Initialize and clicking Reboot.
Step 5
After you reboot, log back into the camera on your web browser, using
http://(IP address):(Camera port number).
For this example, the address would be http://192.168.1.101:3333.
You must be logged in to post a comment.